Tahnan
Level: Smitemaster

Rank Points: 2460
Registered: 11-14-2005
IP: Logged

You can't copy obstacles. Why can't you copy obstacles?

When you copy a scripted character, there's no way to say "and while you're at it, move the coordinates within the script the same way".

You can't change part of a coordinates-selecting command without reselecting the coordinate (if, e.g., you want to change "wait for NPC" to "wait while NPC at", or change "no turning" from off to on).

You can't turn a pit into a door in one step: you have to turn the pit into floor, and then the floor into a door. Similarly for everything else.

---

Er, wait, this is "feature requests", not "things that drive you nuts". OK, so, the feature request: I'd like to see all of those things changed. :-)

Kwakstur
Level: Smiter

Rank Points: 385
Registered: 05-05-2006
IP: Logged

I would have to agree with you on the issues with pits and doors. However, the editor is set up this way to actually make some things faster . . . for instance, if you want a section of floor near pits to be door, you can just put the pits down and then drag the door over it. The door will only appear on the floor instead of the pits.

And you appear to be right about the obstacles. Why can't they be copied?
Now that needs to be fixed.

To the NPC auto-updating coords as you move them, that would definitely have to be an option instead of something that always happens when you move them. But it would be so helpful for script-dependent holds.

And to keeping coords when changing the properties of a move command, that's another good idea.

____________________________
Also known as ExpHP everywhere else.

Kevin_P86
Level: Smitemaster

Rank Points: 535
Registered: 06-28-2005
IP: Logged

It seems TCB will have relative coordinates, so the copy-paste NPC thing will be automatically taken care of by that.

____________________________
+++++[>+++++<-]>[>+++>++++>+++++<<<-]>.>+.>-------.<++++.+++++.

Tahnan
Level: Smitemaster

Rank Points: 2460
Registered: 11-14-2005
IP: Logged

Kevin_P86 wrote:
It seems TCB will have relative coordinates, so the copy-paste NPC thing will be automatically taken care of by that.

Not necessarily. If for instance instead of "go three steps north", I told the guard, "go to (18,12)", I might still want that coordinate copied relatively (just as it would change relatively if I reflected the room).

Jatopian
Level: Smitemaster
Rank Points: 1842
Registered: 07-31-2005
IP: Logged

Tahnan wrote:

Kevin_P86 wrote:
It seems TCB will have relative coordinates, so the copy-paste NPC thing will be automatically taken care of by that.

Not necessarily. If for instance instead of "go three steps north", I told the guard, "go to (18,12)", I might still want that coordinate copied relatively (just as it would change relatively if I reflected the room).

But why would you do that?

____________________________
DROD has some really great music.
Make your pressure plates 3.0 style!
DROD architecture idea generator

NiroZ
Level: Smitemaster
Rank Points: 1302
Registered: 02-12-2006
IP: Logged

hmm, is this 4th or the 5th one you have listed? I wonder, am I winning yet?

Jatopian wrote:

Tahnan wrote:

Kevin_P86 wrote:
It seems TCB will have relative coordinates, so the copy-paste NPC thing will be automatically taken care of by that.

Not necessarily. If for instance instead of "go three steps north", I told the guard, "go to (18,12)", I might still want that coordinate copied relatively (just as it would change relatively if I reflected the room).

But why would you do that?

What if you wanted heaps of monsters to go to the same spot? I have seen it happen before.

---

[Last edited by NiroZ at 05-30-2007 04:52 PM]

Kevin_P86
Level: Smitemaster

Rank Points: 535
Registered: 06-28-2005
IP: Logged

NiroZ wrote:
What if you wanted heaps of monsters to go to the same spot? I have seen it happen before.

Then there's no problem - you can just copy and paste the NPC with the current copy-and-paste functionality and that's what'll happen.

____________________________
+++++[>+++++<-]>[>+++>++++>+++++<<<-]>.>+.>-------.<++++.+++++.

NiroZ
Level: Smitemaster
Rank Points: 1302
Registered: 02-12-2006
IP: Logged

Kevin_P86 wrote:

NiroZ wrote:
What if you wanted heaps of monsters to go to the same spot? I have seen it happen before.

Then there's no problem - you can just copy and paste the NPC with the current copy-and-paste functionality and that's what'll happen.

I know XD. I was just pointing out the usefulness of that, although I probably didn't make it as clear as I wanted.

Sillyman
Level: Smiter

Rank Points: 339
Registered: 09-08-2006
IP: Logged

I believe that absolute coordinates are staying as well, which takes care of that.

____________________________
Who, me?
FNORD

mrimer
Level: Legendary Smitemaster

Rank Points: 5140
Registered: 02-04-2003
IP: Logged

3.0 will support obstacle- and serpent-copying in the room editor.

____________________________
Gandalf? Yes... That's what they used to call me.
Gandalf the Grey. That was my name.
I am Gandalf the White.
And I come back to you now at the turn of the tide.