bomber50
Level: Smitemaster
Rank Points: 872
Registered: 09-18-2006
IP: Logged

If you try to place a mirror at a spot that already has a mirror, you'll have two mirrors on the same spot. This only seems to happen in TSS.

If you try to stab the mirror, only one of them will be destroyed. If you try to push the mirror, you'll get two mirrors.

This doesn't work if you try to put three or more mirrors in the same spot.

---

[Last edited by bomber50 at 09-23-2014 03:40 PM]

The Architest
Level: Master Delver

Rank Points: 255
Registered: 05-25-2008
IP: Logged

Can confirm this. When you click the tile where the mirrors are, it says that there's only one mirror.

disoriented
Level: Smitemaster

Rank Points: 2403
Registered: 08-07-2007
IP: Logged

File: bug hold.hold (763 bytes)
Downloaded 46 times.
License: Public Domain

Here's a room showing the problem.

____________________________
34th Skywatcher

Best to PM me, since I might miss your message on CaravelNet chat.

mrimer
Level: Legendary Smitemaster

Rank Points: 5158
Registered: 02-04-2003
IP: Logged

This issue is only happening in the room editor, correct?

i.e., not by pushing a mirror on top of a mirror, right?

____________________________
Gandalf? Yes... That's what they used to call me.
Gandalf the Grey. That was my name.
I am Gandalf the White.
And I come back to you now at the turn of the tide.

---

[Last edited by mrimer at 02-07-2015 02:52 AM]

Dragon Fogel
Level: Smitemaster
Rank Points: 2467
Registered: 06-21-2014
IP: Logged

I just did a quick test; I couldn't push mirrors on top of other mirrors with any weapon or with Beethro's body.

I did get the bug to happen in the editor, and it worked as noted in the original post, regardless of how I pushed or destroyed the mirror.

Aquator
Level: Smiter

Rank Points: 408
Registered: 10-25-2014
IP: Logged

Should have just pretended it's an incredibly subtle reference to the Banach–Tarski paradox.

...Sometimes I am astounded by my brain's capacity to come up with far-fetched excuses in order to avoid potential work.

skell
Level: Legendary Smitemaster

Rank Points: 3771
Registered: 12-28-2004
IP: Logged

No, the only way to place a mirror on top of another was in the editor.

This has been fixed in 5.0.2, although if there is any hold published which has this "feature" it will stay the way it is.

____________________________
My website

bomber50
Level: Smitemaster
Rank Points: 872
Registered: 09-18-2006
IP: Logged

Tested in 5.0.2, and this issue appears to have been fixed. Can no longer place mirrors on top of each other.

adS
Level: Master Delver

Rank Points: 214
Registered: 05-02-2010
IP: Logged

Confirmed,

adS

____________________________
pauca sed matura

Insoluble
Level: Smitemaster

Rank Points: 1639
Registered: 09-04-2014
IP: Logged

Confirmed that this is fixed. Just for the sake of thoroughness, I tested this out on the following and you can not place a mirror on top of a mirror on any of the following:

Wall, hard wall, yellow, red, black, and blue gates(and sister gates), all pressure plate types, trapdoors (over both), platforms (over both), bridges, thin ice, fire and spike traps, hot tiles, fluff vents, all kinds of floor (including image).

You can not place a mirror at all on water, shallow water, pits, hold complete and master walls, or (interestingly) crumbly walls and secret walls. However, you can place a build marker for a mirror on crumbly walls, secret walls, pits, water, and shallow water and an engineer will build it. A mirror on a pit, shallow water, or water, can be pushed off onto normal ground once it has been built. This seems a bit buggy, but I'm not sure if it is an entirely separate issue or related to the original mirror bug in this thread. This is all in build 5.0.2.1004

____________________________
Links to neat forum tools that I always have trouble finding:

---

[Last edited by Insoluble at 08-03-2015 07:57 AM : specificity]

skell
Level: Legendary Smitemaster

Rank Points: 3771
Registered: 12-28-2004
IP: Logged

Anything that is not "placing mirror on top of another in the editor" is a separate issue and, ideally, should be reported in a separate thread.

____________________________
My website