schep
Level: Smitemaster

Rank Points: 865
Registered: 03-01-2005
IP: Logged

I tried to make the steps to reproduce this simpler, but this was as far as I got before any change seemed to make things bugless again. Reconstruct the following ASCII diagram in the editor:

[..]   . - floor   D - closed door
 O.    O - orb    [] - copy selection corners
 D.
[.D]
 .D

Connect the orb to both doors. Click on the top square of the tall door to make the connection, not the bottom square. Select the marked 2x4 region and Ctrl-C it. Click on the orb to paste one square south of its location. The orb now seems to be connected to a square with no door.

mrimer
Level: Legendary Smitemaster

Rank Points: 5120
Registered: 02-04-2003
IP: Logged

schep wrote:
Connect the orb to both doors. Click on the top square of the tall door to make the connection, not the bottom square. Select the marked 2x4 region and Ctrl-C it. Click on the orb to paste one square south of its location. The orb now seems to be connected to a square with no door.

Thank you for reporting this. I've fixed this so it doesn't cause orb associations to non-door spots.

____________________________
Gandalf? Yes... That's what they used to call me.
Gandalf the Grey. That was my name.
I am Gandalf the White.
And I come back to you now at the turn of the tide.