blorx1
Level: Smitemaster
Rank Points: 920
Registered: 07-18-2009
IP: Logged

File: Fuse Beeps.hold (874 bytes)
Downloaded 43 times.
License: Public Domain

In the following hold stepping north every turn will cause a beep when the mirrors are pushed onto the burning fuse. Furthermore, there seems to be some inconsistent behavior about when the fuses are destroyed upon the mirror being pushed onto the fuse. I haven't been able to reproduce the inconsistency in this room, but play around with the fuse in the corner and it seems to happen there.

____________________________
If you need to think outside of the box, then you didn't build a good enough box.

skell
Level: Legendary Smitemaster

Rank Points: 3734
Registered: 12-28-2004
IP: Logged

PR.

I've fixed the beep but I am not able to have any inconsistency occur. Can you give more details?

____________________________
My website | Facebook | Twitter

blorx1
Level: Smitemaster
Rank Points: 920
Registered: 07-18-2009
IP: Logged

So looking at this again, I'd noticed that fuses only stop burning on half-turns, which isn't really what I'd expect, but can be considered sane behavior. I probably got confused by this and might have attributed inconsistency to that.

____________________________
If you need to think outside of the box, then you didn't build a good enough box.

kieranmillar
Level: Smitemaster
Rank Points: 2670
Registered: 07-11-2014
IP: Logged

Can confirm the attached example hold no longer beeps in 5.1.1.alpha.2020-10-18.